Aller au contenu principal

Victron Energy

VE.Bus BMS NG

Demande de devis sans obligation d’achat.

Sur demande

SKU: BMS300200300

Demander un devis

Livraison et montant final : selon devis.

Les montants TTC sont indiqués pour la Croatie. Le prix, le traitement fiscal et la livraison à destination seront confirmés dans le devis.

Installation et compatibilité

Détails du produit

Description

La description originale actuelle du fournisseur est affichée. La traduction est en cours de mise à jour.

The VE.Bus BMS NG is an all-in-one Battery Management System (BMS) for Victron Lithium NG batteries (not compatible with Lithium Battery Smart batteries), designed for systems with Victron inverters or inverter/chargers using VE.Bus communication. It monitors and protects the batteries against over voltage and under voltage of any individual cell, and also over temperature or under temperature conditions.
With built-in Bluetooth, the BMS provides central monitoring via VictronConnect. The BMS derives all key parameters including voltage, current, state of charge and individual cell data directly from the battery, removing the need for a separate SmartShunt.
The lithium NG batteries can be configured in series, parallel, or a combination of both, supporting 12V, 24V, and 48V systems. A maximum of 50 batteries can be used in 12V or 24V banks, and 25 batteries in 48V banks, enabling up to 192 kWh (12V), 384 kWh (24V), and 128 kWh (48V) of storage. Multiple Lynx Smart BMS units can be paralleled to expand capacity and ensure redundancy.
Key Features:
Bluetooth Smart: The VE.Bus BMS NG includes Bluetooth Smart for wireless configuration, monitoring, and firmware updates via the VictronConnect App. Instant Readout shows key data such as SoC, battery temperature, warnings, and alarms directly in the device list, without needing to connect.
Load disconnect output: Controls the remote on/off input of a BatteryProtect, inverter, DC-DC converter, or other loads with remote on/off functionality to prevent deep discharge.
Charge disconnect output: Controls the remote on/off port of chargers such as the Smart IP43 Charger, a Cyrix-Li-Charge relay, a Cyrix-Li-ct Battery Combiner, or a BatteryProtect, to prevent overvoltage.
Pre-alarm output: Provides early warning for low battery voltage before disconnecting loads. Can drive a relay, LED, or buzzer.
Remote on/off control: Allows external control of both load and charge disconnect outputs.
LED indicators: Includes a blue LED for Bluetooth status and a red LED for warnings and errors.

Données techniques

Težina
0.12 kg
Feature
Bluetooth Smart: The VE.Bus BMS NG includes Bluetooth Smart for wireless configuration, monitoring, and firmware updates via the VictronConnect App. Instant Readout shows key data such as SoC, battery temperature, warnings, and alarms directly in the device list, without needing to connect.
Feature
Load disconnect output: Controls the remote on/off input of a BatteryProtect, inverter, DC-DC converter, or other loads with remote on/off functionality to prevent deep discharge.
Feature
Charge disconnect output: Controls the remote on/off port of chargers such as the Smart IP43 Charger, a Cyrix-Li-Charge relay, a Cyrix-Li-ct Battery Combiner, or a BatteryProtect, to prevent overvoltage.
Feature
Pre-alarm output: Provides early warning for low battery voltage before disconnecting loads. Can drive a relay, LED, or buzzer.
Feature
Remote on/off control: Allows external control of both load and charge disconnect outputs.
Feature
LED indicators: Includes a blue LED for Bluetooth status and a red LED for warnings and errors.
Bluetooth Smart: The VE.Bus BMS NG includes Bluetooth Smart for wireless configuration, monitoring, and firmware updates via the VictronConnect App. Instant Readout shows key data such as SoC, battery temperature, warnings, and alarms directly in the device list, without needing to connect.
Load disconnect output: Controls the remote on/off input of a BatteryProtect, inverter, DC-DC converter, or other loads with remote on/off functionality to prevent deep discharge.
Charge disconnect output: Controls the remote on/off port of chargers such as the Smart IP43 Charger, a Cyrix-Li-Charge relay, a Cyrix-Li-ct Battery Combiner, or a BatteryProtect, to prevent overvoltage.
Pre-alarm output: Provides early warning for low battery voltage before disconnecting loads. Can drive a relay, LED, or buzzer.
Remote on/off control: Allows external control of both load and charge disconnect outputs.
LED indicators: Includes a blue LED for Bluetooth status and a red LED for warnings and errors.

Installation et compatibilité

Ce qui est inclus

Le contenu exact fourni pour le modèle choisi est confirmé dans le devis. Consultez la description et les documents du modèle pour les détails publiés du kit.

Composants supplémentaires à vérifier

Chargeur et sources de charge, câbles, bornes, protections électriques et connexions de surveillance selon l’usage.

Ces points servent à préparer le système complet. Certains composants peuvent déjà être inclus ou installés sur votre bateau.

Vérifications de compatibilité

Profils de charge, tension, courants admissibles, dimensions et communications. Les connexions en série/parallèle doivent être autorisées pour le modèle exact.

Avant de choisir les composants, vérifiez les caractéristiques du modèle exact et les instructions du fabricant.

Assistance à l’installation

UnLucky peut évaluer l’installation et préparer une proposition. Envoyez la référence du produit/modèle, la marque et le modèle du bateau, sa localisation, des photos de la zone d’installation et les détails de l’équipement existant.

Le périmètre du service, la disponibilité et les coûts d’installation sont confirmés dans le devis.

Discuter de votre installation

Brochures, manuels et catalogues de pièces

Vérifier modèle et numéro de série du moteur. Les documents anciens peuvent concerner une autre génération.