UnLucky is listed on the official Hidea locator as a service point in Croatia. From Split we handle requests for scheduled maintenance, fault finding, fuel and cooling-system checks, engine electrics, controls and parts preparation matched to the exact model and serial number.
Engine range and series names were checked against the official Hidea Europe website. Exact version, model year, parts and service procedure are always confirmed from the engine plate and current documentation.
Service based on the engine’s actual condition
The same symptom can have different causes: fuel, ignition, cooling, power supply, controls or mechanical condition. We therefore work from engine identification and owner input through measurements, inspection and a functional test.
We confirm the scope after receiving the model, serial number, model year if known, service history and symptom description.
The service plan is matched to the model, operating hours, calendar interval and vessel use.
Hard starting, unstable running and power loss are checked across the full fuel path, not one component.
A weak tell-tale, temperature alarm or overheating requires checks of the intake, impeller, passages, thermostat and operating conditions.
Starting and charging issues require checks of the battery, voltage drop, grounds, starter, ignition and charging output.
Hard shifting, vibration and weak thrust are not judged from the propeller alone; the complete mechanical chain is checked.
Inspection before intensive use or purchase helps separate routine maintenance from hidden faults and deferrable work.
Official product range
Hidea Europe lists carburettor and EFI series, spare parts, accessories and kits. Horsepower alone is not enough for service: the full model code, shaft length, control type, serial number and installed equipment matter.
Availability of each model or part depends on the current European programme and supplier confirmation.
The official site lists portable and smaller four-stroke carburettor versions, including HDF2.5, HDF4, HDF5, HDF6, HDF8 and HDF9.9.
Confirm the full code, shaft and control type.The current listing includes EFI versions from HDEBF20EFI and HDEF30, HDEF40, HDEF50 and HDEF60, with control and shaft variants.
EFI diagnostics and parts depend on the exact version.The official Hidea Europe listing includes HDEF100, HDEF115, HDEF130, HDEF150, HDEF175 and HDEF200 EFI series.
Operating hours and maintenance history are needed.Hidea Europe separately lists spare parts, propellers, instruments, controls and kits. Supply is checked against serial number and compatibility.
Do not order a part from a photo or horsepower alone.Information that speeds up service
Send as much verifiable information as possible. It lets us separate a maintenance request, parts request, electrical fault and possible mechanical repair before agreeing the next practical step.
Prepare a service requestUnLucky service process
We do not replace parts blindly. Work is organised around the symptom, available documentation, vessel conditions and agreed scope.
For a warranty case, procedure and approval are aligned with current importer and manufacturer rules before work begins.
We check model, serial number, location, history, symptoms and request goal.
Visual inspection and base measurements direct further diagnostics without random parts replacement.
We explain findings, propose priorities and confirm parts, work scope and next step.
After approval, work is completed followed by leak and functional or running tests when conditions allow.
Publicly verifiable status
The official Hidea/Lalizas Croatia list names Obrt UNLUCKY, its Žrnovnica/Split address and contact as a “Service Point”. We use that wording precisely, without adding sales or distributor status not shown in the locator.
Frequently asked questions
These answers help prepare your request. A final assessment follows engine identification and inspection of its actual condition.
UnLucky is publicly listed as a “Service Point” on the official Hidea/Lalizas Croatia page. The locator does not list UnLucky as a Selling Point, so this page does not add sales or distributor status.
We can assess requests for series shown in the current European range, but acceptance and scope are confirmed only after the full model code, serial number, year and work description are supplied. This avoids preparing incorrect parts or tools.
Availability and compatibility are checked from exact engine identification. Send the plate photo, a photo of the installed part and the original part number if available. Supply depends on supplier confirmation.
The interval comes from the exact model manual and is compared with operating hours, calendar time, salt-water use and storage conditions. We do not recommend one universal interval for every model and use profile.
It depends on the engine, work type, access and location. A small portable engine may be better handled in the workshop, while some checks and work on larger units can be arranged onboard. We confirm the method after the initial information.
Send the invoice or proof of purchase, model, serial number, date first used, symptom description and photos. Warranty status and procedure are not automatic; they are checked with the importer/manufacturer before work intended to be covered begins.
Hidea service • Split and Dalmatia
Tell us where the vessel or engine is located, whether it starts, when the issue occurs and what has already been checked. You can send the plate photo and a short symptom video in the follow-up.
