Digital switching without clutter
Classic panels, switches and separate fuses are replaced with logic that is cleaner, programmable and easier to monitor.
Digital switching support
CZone for boats, yachts and RV installations
Smart electrics that are seen, controlled and serviced from one system.
CZone connects digital switching, DC/AC monitoring, displays, keypads and network modules into a clear control system. UNLUCKY supports it through installation review, module planning, scenario configuration and service preparation.
AC InterfacesSmart Battery HubsDC InterfacesDisplaysKeypadsNMEA 2000Network InterfacesMonitoringCables & ConnectorsTerminal Blocks
Simplified Electrical Systems
Fewer physical switches. More control, status and logic.
CZone is built around the idea that an electrical system should be simpler for the user and clearer for service. Circuits are grouped, logic is programmed and status is visible through a screen, MFD or remote control.
One interface for status and control
The user sees circuits, alerts, voltages, tanks and modes on a CZone display, MFD or remote control.
Integration with marine electronics
CZone fits into an NMEA 2000 environment and supports modern chartplotters, MFD screens and remote controls.
Logic for real onboard conditions
Dimming, timers, time-of-day switching, load shedding and alarm logic help the system react before a problem grows.
CZone in real onboard environments
Modules that build the system
From one compact box to a complete digital distribution system.
DC Interface
Contact 6 Plus
Compact digital switching with 6 x 15A solid-state fused outputs for standalone use or a networked CZone installation.
- 12/24V DC, up to 60A total
- MFD and NMEA 2000 network integration
- Load shedding, dimming, timers and blown-fuse detection
Compact Control
Control 1
One compact box for control and monitoring with high-current and low-current outputs, analog inputs and mechanical bypass.
- 4 x 25A + 12 x 10A outputs
- 8 analog inputs for tanks, batteries, temperature and pressure
- USB firmware and configuration update
Display
Touch displays
CZone screens give a clean view of circuits, tanks, batteries, status and modes without scattered panels.
- Modern 5”, 7” and 10” interfaces
- Modes, favourites and system status
- Suitable for refit and new builds
Keypads
6-way and 12-way waterproof keypads
Low profile, RGB backlighting, single-cable installation and portrait or landscape layout options.
- IPX7 for deck conditions
- Custom overlays and LED status
- Controls Contact 6 Plus and other CZone modules
Network
Network and wireless interfaces
Bridge modules, wireless interfaces and NMEA 2000 components connect CZone with the rest of the onboard electronics.
- NMEA 2000 Network Bridge
- Wireless interface and remote access
- Drop cables, bridges and integration modules
Monitoring
DC/AC monitoring and smart logic
Meters, signal interfaces, shunts and alarm rules give better visibility of loads, charging and safety events.
- Tanks, batteries, voltage, current and alarms
- Load shedding for priority circuits
- Clear for skipper, service and refit planning
Support-first approach
CZone is not only a module list, but a whole-vessel architecture.
Load and existing-panel audit
DC and AC circuits, loads, priorities, fuses, existing switches, tanks, batteries and alarm signals are mapped.
Network and module architecture
The NMEA 2000 backbone, module positions, MFD/display views, keypads, power supply and service access are defined.
Scenario configuration
Favourites, timers, dimming, load logic, alarms, load shedding and low-voltage behaviour are configured.
Support, documentation and upgrades
For existing and new installations, diagrams, module lists, configuration notes and future expansion plans are prepared.
On-water integration
From helm screens to deck keypads — everything is part of one system.
The CZone marine approach is especially strong on vessels where electrics, monitoring and user controls need to behave as one system: chartplotters, MFD screens, iPad/remote controls, network bridges and waterproof keypads can handle daily operation without a cluttered classic panel.
MFD
NMEA 2000
Keypads
Remote
Documentation and official sources
Fast access to catalogue, manuals and categories for a technical inquiry.
↗
CZone resources and catalogue
Catalogue, quick-start guides, configurator instructions, integration manuals and module manuals.
↗DC interface modules
Contact 6 Plus, Control 1, Output Interface, Signal Interface, Meter Interface and related modules.
↗Keypads and controls
6-way and 12-way IPX7 keypads for simple control of selected circuits and modes.
↗Marine application
Overview of the CZone approach for boats, yachts, integrated helms, controls and on-water displays.
Frequently asked questions
Is CZone suitable for an existing installation?
Yes, but module selection starts with a review of existing circuits, fuses, installation space, power, NMEA 2000 network and desired control modes.
Can CZone work with a chartplotter or MFD?
CZone is built for integration with modern marine electronics. In practice, the MFD model, network, firmware and required on-screen functions are checked.
What information is needed for a first CZone inquiry?
The most useful data are vessel type and length, current distribution panel, load list, installation photos, MFD models, battery system and upgrade goal.